Product Overview:
UL 854 Aluminum Service Entrance Cable
Type SE/SEU/SER aluminum service entrance cable provides reliable 600V power distribution from junction boxes to meter bases and distribution panels. Featuring AA-8030 alloy conductors, XLPE insulation, and sunlight-resistant PVC jacketing, this UL 854-compliant solution excels in wet/dry environments up to 90°C. Available in 2/0 AWG and 4/0 AWG configurations.
Key Applications
-
Service Entrance Runs: Meter base to distribution panel connections
-
Power Transmission: Junction box to meter base installations
-
Wet/Dry Locations: Indoor/outdoor environments including direct exposure
-
Residential/Commercial: NEC-compliant service entrance applications
Standards & Certifications
-
Conductors: ASTM B-800 & B-801
-
Insulation: UL 44 (XHHW-2 Rating)
-
Cable Standard: UL 854 (SER/SEU)
-
Environmental: RoHS Compliant (Heavy Metal-Free)
-
Voltage Rating: 600V
Construction & Material Specifications
| Component | Specification |
|---|---|
| Conductor | AA-8030 Aluminum Alloy (8000 Series) |
| Insulation | XLPE (Cross-Linked Polyethylene) - 90°C rated, abrasion/moisture/heat resistant |
| Flame Resistance | Meets FT2 combustion requirements |
| Assembly | Fibrage tape wrap over conductor core |
| Jacket | UV-resistant PVC - Sunlight stable (720h tested), moisture/flame retardant |
| Temperature | 90°C dry/wet locations |
Conductor Identification:
-
3-Conductor: Black, Black w/ Red Stripe
-
4-Conductor: Black, Black w/ White Stripe, Black w/ Red Stripe
-
5-Conductor: Black, Black w/ White Stripe, Black w/ Red Stripe, Black w/ Blue Stripe
Technical Advantages
-
Alloy Conductors: AA-8030 aluminum offers superior creep resistance and conductivity
-
XLPE Insulation: Maintains flexibility at -40°C to 90°C with excellent dielectric strength
-
UV-Stable Jacket: Withstands prolonged sunlight exposure (720h tested)
-
Wet Location Rated: Water-resistant construction for outdoor/damp installations
-
Flame Performance: FT2-rated flame retardancy reduces fire propagation risk
Engineering Selection Guide
| Parameter | 2/0 AWG | 4/0 AWG |
|---|---|---|
| Conductor Type | AA-8030 Alloy | AA-8030 Alloy |
| Voltage Rating | 600V | 600V |
| Temp. Rating | 90°C (Wet/Dry) | 90°C (Wet/Dry) |
| Insulation | XLPE (UL 44) | XLPE (UL 44) |
| Jacket | UV-Resistant PVC | UV-Resistant PVC |
| Applications | Service Entrances | High-Current Feeds |
Note: Always verify ampacity using NEC Table 310.15(B)(16) and derate for ambient conditions
Compliance & Installation Notes
-
UL 854 Compliance: Suitable for above-ground service entrance applications
-
NEC Classification: Type SE cable per Article 338
-
Bending Radius: Minimum 7x cable diameter
-
Grounding: Separate equipment grounding conductor required per NEC 250.118
-
Conduit Use: Not required for exposed runs but recommended for physical protection