- Table 1
| Physical Properties | ||||||
| Power cores | ||||||
| Conductor sizes (mm2) | 35 | 50 | 70 | 95 | 120 | 150 |
| Maximum wire diameter ( mm) | 0.41 | 0.41 | 0.51 | 0.51 | 0.51 | 0.51 |
| Approx. conductor diameter ( mm) | 8.5 | 10.3 | 11.9 | 13.5 | 15.5 | 17.3 |
| Maximum screen wire diameter (mm) | 0.31 | 0.31 | 0.31 | 0.31 | 0.31 | 0.31 |
| Braided screen filling factor (%) | 80 | 80 | 80 | 80 | 80 | 80 |
| Approx. summarized screen cross-section for power cores (weighing method) (mm2) | 27 | 32 | 37 | 43 | 47 | 52 |
| Pilot cores | ||||||
| Conductor sizes ( mm2) | 6 | 6 | 16 | 16 | 16 | 16 |
| Maximum wire diameter ( mm) | 0.31 | 0.31 | 0.41 | 0.41 | 0.41 | 0.41 |
| Approx. conductor diameter ( mm) | 3.2 | 3.2 | 5.2 | 5.2 | 5.2 | 5.2 |
| Lay Ratio (maximum) (x PCD) | 12 | 12 | 12 | 12 | 12 | 12 |
| Cable diameter | ||||||
| Approx. (mm) | 41 | 42.5 | 48 | 52.3 | 58 | 63.5 |
| Cable mass (approx.) (kg/m) | 3.1 | 3.6 | 4.8 | 5.7 | 7.1 | 8.5 |
| Minimum bending radius (mm) | 300 | 340 | 390 | 430 | 460 | 500 |
| Maximum recommended tension (kN) | 1.6 | 2.3 | 3.2 | 4.3 | 5.4 | 6.8 |
Table 2
| Electrical Properties | ||||||
| Power cores | ||||||
| Maximum cond. DC resistance @ 200C (Ω/km) | 0.576 | 0.401 | 0.283 | 0.214 | 0.167 | 0.135 |
| Maximum cond. DC resistance @ 900C (Ω/km) | 0.734 | 0.511 | 0.360 | 0.273 | 0.213 | 0.171 |
| Reactance (Ω/km) | 0.090 | 0.090 | 0.088 | 0.086 | 0.086 | 0.085 |
| Impedance (Z) @ 900C (Ω/km) | 0.740 | 0.519 | 0.371 | 0.287 | 0.230 | 0.191 |
| Sustained current rating @ 300C ambient | ||||||
| Laid out straight (A) | 160 | 200 | 245 | 295 | 345 | 390 |
| Short circuit rating : | ||||||
| Symmetrical fault current (kA for 1 sec) | 4.3 | 6.1 | 8.5 | 11.6 | 14.6 | 18.3 |
| Earth fault current (screens) (kA for 1 sec) | 2.1 | 3.1 | 3.5 | 4.1 | 4.1 | 4.1 |