15kV 133% IL 3/C 3/0 AWG Underground Power Cable | TR-XLPE Insulation, Copper Conductor, LLDPE Sheath | UL 1072 & AEIC CS-8 Certified

Medium Voltage (MV) Cables11
Description

Product Overview

High-Reliability Underground Power Transmission
Designed for critical primary distribution networks, this 15kV 133% IL power cable features 3/C 3/0 AWG copper conductors with TR-XLPE insulation and a sunlight-resistant LLDPE sheath. Certified to UL 1072 and AEIC CS-8 standards, it delivers superior performance in direct burial, conduit systems, and wet/dry locations at temperatures up to 105°C. Ideal for utility grids, industrial campuses, and renewable energy projects.

Key Specifications

Parameter Specification
Voltage Rating 15kV (133% insulation level)
Conductor 3×3/0 AWG soft annealed copper (ASTM B3/B8)
Insulation Thermoplastic-Reinforced XLPE (TR-XLPE)
Metallic Shield Copper wire shield (ASTM B3)
Jacket Linear Low-Density Polyethylene (LLDPE), black
Temperature Range -40°C to +105°C (90°C continuous operation)
Certifications UL 1072, AEIC CS-8, ICEA S-94-649, ANSI/OCA S-94-649

Cable Construction

Layer Material & Function
1. Conductor 3/0 AWG compressed stranded copper · Low impedance · High fault-current capacity
2. Conductor Shield Semi-conducting XLPE · Smooths electric field gradients
3. Insulation TR-XLPE · 133% insulation level · Superior dielectric strength
4. Insulation Shield Semi-conducting XLPE · Prevents partial discharge
5. Metallic Shield Helically applied copper wires · Manages ground-fault currents
6. Jacket LLDPE · UV/oil/chemical resistant · -40°C cold impact rating

Technical Advantages

  1. Enhanced Safety

    • 133% insulation level withstands 15kV surges + transient overvoltages.

  2. Environmental Resistance

    • LLDPE jacket resists moisture, acids, alkalis, and UV degradation.

  3. Fault Resilience

    • Copper wire shield handles 25kA fault currents (AEIC CS-8 compliant).

  4. Long Service Life

    • TR-XLPE insulation maintains integrity at 105°C for 40+ years.

  5. Easy Identification

    • Surface-printed jacket with lightning bolt symbol (red stripes optional).

Applications

  • Utility Primary Distribution: Underground feeder lines (≤15kV).

  • Industrial Complexes: Power networks in refineries, chemical plants.

  • Direct Burial: Conduit-free trench installations.

  • Solar/Wind Farms: Grid interconnection cables.

  • Flood-Prone Areas: Moisture-blocking design (ICEA T-31-610 compliant).

Performance Data

Characteristic Value Test Standard
Max Operating Temp 90°C (normal) / 140°C (emergency) UL 1072
Short Circuit Rating 250°C for 5 seconds AEIC CS-8
Bending Radius 18× cable diameter ICEA S-94-649
Water Penetration 15 psi / 60 min (optional sealed strand) ICEA T-31-610
Jacket Thickness 85 mil (2.16 mm) ANSI/OCA S-94-649

Standards Compliance

Standard Requirement
UL 1072 Medium Voltage Power Cable Safety
AEIC CS-8 Utility Cable Performance (5kV-46kV)
ICEA S-94-649 Shielded Power Cable Construction
RUS 1728F-U1 USDA Rural Utilities Service Approval

Engineering Selection Guide

  • For High-Corrosion Zones: Specify LLDPE jacket (superior to PVC in chemical resistance).

  • Fault-Prone Networks: Copper wire shield (not tape) for better current dissipation.

  • Cold Climates: -40°C rated sheath maintains flexibility in Arctic conditions.

  • Identification: Request red stripes for phase differentiation in duct banks.

Note: Custom configurations (neutral wires, armor, fire rating) available. Request ICEA test reports for water-blocking verification.